Discount-Trailers > Motorcycle Trailers > Port-a-Chopper Trailer
Port-A-Chopper

The Port-a-Chopper Motorcycle Transport Trailer is designed to be taken and used almost anywhere. The key feature of this motorcycle trailer is the ability to be disassembled and stored right in the trunk or back of your vehicle in under 15 minutes. The trailer has 11 pieces and is held together with bent hitch pins which means you don't need any tools to assemble and disassemble the trailer. No section of the trailer is more than 44" wide or weighs more than 44 lbs. The trailer includes a loading ramp which is held on with a bent hitch pin. The loading ramp is lightweight and small for easy storage in your vehicle when not in use. The motorcycle trailer features a torsion axle suspension that virtually eliminates all stress on the motorcycle and provides a smooth ride. The wheel channels on the trailer are 6 1/2" wide and made of high strength aluminum which won't rust. The attaching light bar features two brake lights and is also constructed of aluminum. The wires for the brake lights can be strung down the side of the trailer and held on by clips to keep the wires secure. Also featured on this trailer is an adjustable wheel stop which allows for 16" of adjustment. The trailer also features a stainless steel kickstand pad to rest the bike on when securing with tie down straps. The high speed tires are 8" in diameter and feature a 6-ply construction for long range travel. The motorcycle trailer has a GVW rating of 1,200 lbs, which will accommodate almost any bike. The Port-a-Chopper is available in an 80" or 96" motorcycle wheel base track and available in galvanized or black E-Coat finishes.

Also available are conversion kits to turn the Port-a-Chopper into a PWC or utility trailer. The PWC kit allows for hauling of a 9' water craft up to 1000 lbs. The PWC conversion kit includes all mounting brackets but does not include bunk rails. The utility trailer conversion kit allows for the Port-a-Chopper to be converted into a 4 x 8 utility trailer with a 1000 lb load capacity. The utility trailer conversion kit excludes lumber. The Port-a-Chopper trailer and conversion kits include a 36 month limited warranty.

Click a picture below to enlarge
Woman siting next to the motorcycle trailer disasembled. Port-a-Chopper disassembled and stored in the back of a mini-van. Port-a-Chopper Dimensions

Port-a-Chopper Features:

  • Disassembles and stores in the trunk or back of your vehicle
  • Assembles in less than 15 minutes
  • Includes a loading ramp for loading your bike
  • Integrated adjustable wheel chock for getting the ideal tongue weight
  • Stainless steel kickstand pad allows the bike to rest while securing with tie down straps
  • 1 7/8" ball coupler
  • Includes VIN numbers
  • Assembled Dimensions: 10' x 5'
  • Weighs only 275 lbs
  • Can carry motorcycles up to 1,200 lbs
  • Steel components are available in a black E-Coat or galvanized finish
  • Available kits to covert the trailer for utility or PWC
  • Includes a 36 month limited warranty

Port-a-Chopper Videos:

Port-a-Chopper Motorcycle Trailer Pricing & Specifications
Item # Description Rail Width Motorcycle Wheelbase Price
PAC-80-MC Port-a-Chopper Motorcycle Trailer
w/ black E-Coat finish
w/ aluminum ramp and rails
6.5" 80" + 200 s&h to business
+ 275 s&h to residential
PAC-80-MC-G Port-a-Chopper Motorcycle Trailer
w/ galvanized finish
w/ aluminum ramp and rails
6.5" 80" + 200 s&h to business
+ 275 s&h to residential
PAC-96-MC Port-a-Chopper Motorcycle Trailer
w/ black E-Coat finish
w/ aluminum ramp and rails
6.5" 96" + 200 s&h to business
+ 275 s&h to residential
PAC-96-MC-G Port-a-Chopper Motorcycle Trailer
w/ galvanized finish
w/ aluminum ramp and rails
6.5" 96" + 200 s&h to business
+ 275 s&h to residential
Tie-Down Straps
Item # Description Price
Basic
motorcycle straps for strapping down motorcycle on trailer
Click to enlarge
Basic Motorcycle Strap Kit
2 heavy duty 1" wide x 6' long ratchet straps w/ 3000 lb capacity (1000 lb working load)
2 heavy duty 1" wide x 6' long cam buckle straps w/ 1500 lb capacity (500 lb working load)
4 soft loops to prevent scratching your cycle w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
Basic-R
../motorcycle strap package to tie down motorcycle on trailers
Click to enlarge
Basic Deluxe Motorcycle Strap Kit
4 heavy duty 1" wide x 6' long ratchet straps w/ 3000 lb capacity (1000 lb working load)
4 soft loops to prevent scratching your cycle w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
HDMC-Strap
../heavy duty cycle straps for use with trailers
Click to enlarge
Heavy Duty Motorcycle Strap Kit
2 heavy duty 2" wide x 6' long ratchet straps w/ 4400 lb capacity (1466 lb working load)
2 heavy duty 2" wide x 6' long cam buckle straps w/ 3000 lb capacity (1000 lb working load)
4 heavy duty 1" wide x 12" double end soft loops w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
HDMCR-Strap
heavy duty motorcycle strap setup for bikes on trailer systems
Click to enlarge
Heavy Duty Deluxe Motorcycle Strap Kit
4 heavy duty 2" wide x 6' foot long ratchet straps w/ 4400 lb capacity (1466 lb working load)
4 heavy duty 1" wide x 12" double end soft loops w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
6Pack-C
motorcycle tie-down 6 pack
Click to enlarge
6 Pack Strap Package
2 heavy duty 1" wide x 6' long ratchet straps w/ 3000 lb capacity (1000 lb working load)
4 heavy duty 1" wide x 6' long cam buckle straps w/ 1500 lb capacity (500 lb working load)
6 soft loops to prevent scratching your cycle w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
6Pack-R
cycle trailer bike straps
Click to enlarge
6 Pack Deluxe Strap Package
4 heavy duty 1" wide x 6' long ratchet straps w/ 3000 lb capacity (1000 lb working load)
2 heavy duty 1" wide x 6' long cam buckle straps w/ 1500 lb capacity (500 lb working load)
6 soft loops to prevent scratching your cycle w/ 1200 lb capacity (400 lb working load)
+ 8 s&h
HDMC-Snap-Hook
motorcycle tie-down 6 pack
Click to enlarge
2 inch snap hook strap motorcycle tie down kit for pick up trucks and trailers-8 piece kit
(2 cam snap hook straps- 2 ratchet snap hook straps- 4 soft loops)
Total Capacity of 4400 lbs. (1466 lb working load)
+ 8 s&h
HDMCR-Snap-Hook
cycle trailer bike straps
Click to enlarge
2 inch ratchet strap motorcycle tie down kit for pick up trucks and trailers- 8 piece kit
(4 snap hook ratchet straps- 4 soft loops)
Total Capacity of 4400 lbs. (1466 lb working load)
+ 8 s&h
4-Fleece-Sleeves
heavy duty cycle straps for use with trailers
Click to enlarge
4 strap fleece sleeves to fit over 1" or 2" straps
Protect your cycle, ATV, and truck from vibration marks caused by straps rubbing up against unprotected surfaces
+ 4 s&h
4s-loop
heavy duty motorcycle strap setup for bikes on trailer systems
Click to enlarge
4 motorcycle soft loops + 4 s&h

View shopping cart check out

Port-a-Chopper Motorcycle Trailer Optional Accessories
Item # Description Price
PAC-PWC-G Port-A-Chopper PWC Kit
“only” Galvanized Finish
(bunk boards NOT included)
+ 75s&h
PAC-UK Port-A-Chopper 4 x 8 Utility Kit
(lumber excluded)
+ 75s&h
PAC-F Fenders + 40s&h
PAC-F-G Fenders (Galvanized brackets) + 40s&h
PAC-WHL-12U 12” Tire Upgrade + free shipping
PAC-WIDE Wide Channel (8-3/4” Wide) + free shipping
PAC-XWIDE Extra Wide Channel (12-1/2” Wide) + extra wide 48" long loading ramp + free shipping
PAC-WHL-8 Spare 8-inch Tire + free shipping
PAC-WHL-12 Spare 12-inch Tire + free shipping

View shopping cart check out

Trailer & Hitch Accessories
Item # Description Price
HP41
Coupler lock
Click to enlarge
Coupler Lock
Universal design for use on latch type couplers with a locking hole through the handle - Easy to install - Tightens with the turn of a key - 1/4" x 3/4" pin
+ free shipping
A20402
Standard hitch pin
Click to enlarge
Standard Hitch Pin - For 2" Class III and IV receivers - 5/8" x 4-3/4" + free shipping
HP31
Locking hitch pin
Click to enlarge
Locking Hitch Pin - For 2" Class III and IV receivers - 5/8" x 2-3/4" $17.99 + free shipping
HP32
Locking hitch pin
Click to enlarge
Locking Hitch Pin - For 1 1/4" Class I and II receivers - 1/2" x 2-3/4" $14.99 + free shipping
DRH-3
DHR-3 dual 2 inch hitch
Click to enlarge
2" Dual Hitch - For dual purposes - A bottom hitch for towing, and an upper hitch for carrying + 10 s&h
40037
2" Diameter Chrome Trailer Ball
Click to enlarge

2" Diameter Trailer Ball
Shank Size - 1"
Shank Length - 2 1/8"
Rise 0"
7,500 lbs
Chrome

$15.99 + free shipping
40002
1-7/8" Diameter Chrome Trailer Ball
Click to enlarge

1 7/8" Diameter Trailer Ball
Shank Size - 1"
Shank Length - 2 1/8"
Rise 0"
3,500 lbs
Chrome

$13.99 + free shipping
45050
Curt ball mount image
Click to enlarge

Black Powder Coated Ball Mount
GTW/W - 7,500/700
Drop - 4"
Rise 2"
Length - 8 1'/4"

$20.99 + free shipping
45030
Curt powder coat ball mount
Click to enlarge

Black Powder Coated Ball Mount
GTW/W - 7,500 / 750
Drop - 2"
Rise 3/4"
Length - 8 1/4"

$21.99 + free shipping
Steal-Shield-STD
Steal shield on trailer
Click to enlarge

Steal Shield Trailer Lock w/ Keys and "Come Along" Storage Bracket
Click for more info

+ 15 s&h