Tilt-A-Hitch is the world's first tilting trailer hitch adapter.

The Tilt-A-Hitch is heavily constructed of nearly 30 pounds of steel and is designed to provide a lifetime of hassle-free usage. It allows ball height adjustment by simply pulling one pin. Not only can you raise the height of your trailer, but also you can lower it.

This discount trailer hitch adapter will safely tilt any type of ball mount trailer. It has a maximum 7,500 lb safety rating in the normal upright position and a maximum 6,000 lb safety rating when used upside down as a hitch lowering device. Ball NOT included.

Click for close-up of tilting hitch

Click for close-up of tilting hitch

Click for diagram of the trailer hitch adapter

The Tilt-A-Hitch allows you to use your trailer jack to tilt your trailer while still connected to the receiver. After lifting to the desired position, you should replace the pins so the trailer can be moved in any position. The Tilt-A-Hitch has a durable powder coat finish.

WARNING! Never remove both pins at the same time. When lifting the trailer always replace the pins at the desired level

Take a closer look at Tilt-A-Hitch raising a trailer

Click for close-up view of trailer

Click for close-up view of trailer